Protecting yourself against asbestos
Asbestos is a mineral fiber found in rocks. There are several kinds of asbestos fibers, all of which are fire resistant and not easily destroyed or degraded by natural processes.
Uncontrolled, crumbling asbestos is a hazard. It has been well established that asbestos fiber can become embedded in the lung tissue, causing an irritation that often develops into lung cancer ten to twenty years or more after the initial contact occurs.
For asbestos removal, asbestos sampling, or asbestos testing, contact the professionals at Criterium-Jansen Engineers.
Schedule an Asbestos Removal Inspection
Where is asbestos found?
Approximately 20% of all homes are estimated to have some asbestos in them.
Asbestos is a hazard to health when the fibres are disturbed and become airborne. This means that asbestos poses health risks only when fibres are present in the air and then people breathe them into the lungs. Fibres can be released into the air when asbestos containing products break down. This release can happen through deterioration or when the material is cut or disturbed. – (Canadian Centre for Occupational Health and Safety)
Approximately 50% of homes more than 50 years old, however, are likely to contain some asbestos.
In what forms does asbestos take?
Asbestos is contained in many different materials. Technically, there are very few examples of pure asbestos. Typically, it is contained in what is referred to as an ACM or Asbestos Containing Material. Insulation on heating equipment and heating pipes is one of the more common asbestos containing materials.
The fiber content of this material has much to do with its degree of hazard. Some types of asbestos insulation (that which appears similar to corrugated cardboard) has a relatively low fiber content while that which appears more like a solid papier mache material has a higher fiber content, often in excess of 50%.
Furnace cement and other insulations used on old heating equipment also often contain asbestos fiber. Asbestos also occurs in wall plaster, certain types of floor tile, wall shingles, wall and ceiling insulation in some homes constructed between 1930 and 1950, certain types of sprayed or troweled on ceiling treatments, roof shingles, and others.
How does asbestos impact health?
The most hazardous asbestos fiber is very tiny, very sharp and very hard. However, different types of asbestos have different characteristics. Some are less hazardous than others. Only lab tests can determine the type and quantity of asbestos present.
The degree of risk represented by the presence of asbestos is largely a function of its friability. Friability is an indication of how easily the asbestos fiber can become dislodged from the ACM. Softer insulations and aging wall plaster are quite friable while asbestos shingles, asbestos floor tile, and other similar materials are considered to be essentially non-friable and therefore non-hazardous.
How is asbestos best controlled?
Asbestos can be controlled by encapsulation or removal. While asbestos removal is ideal, it should be approached with great caution since careless removal can lead to more extensive contamination of a building than if the material had been left alone.
Encapsulation simply means wrapping the material with a durable enclosure resistant to mechanical damage. Duct tape or a plaster-impregnated cloth is among the preferred materials for encapsulation. Asbestos containing plaster can be encapsulated using good quality paint if the plaster itself is reasonably sound.
Many contractors represent themselves as experts in asbestos removal. Since not all provinces have enacted certification or licensing procedures for asbestos removal contractors, one should exercise great care in selecting a contractor to deal with removing asbestos in any home. Otherwise, the environment of the home could become contaminated as a result of careless removal procedures.
Keep in mind that undisturbed asbestos containing materials are generally not considered hazardous. It is only when the material begins to deteriorate or becomes disturbed (for example, by careless removal) that asbestos fiber could be released into the air and thus become hazardous to anyone breathing in that environment.
Of particular concern are older homes where an old heating system has already been removed. Often the asbestos insulation was carelessly removed. This could have resulted in the discharge of many asbestos fibers into the environment of this home. If you suspect such a condition, the best approach is to retain the services of a competent asbestos testing laboratory to sample both the air quality and any dust present in closets and basements to determine if any residual asbestos fiber might still exist in the building.
If you suspect asbestos is present in any materials in your home, the best approach is to have a certified contractor or engineer perform asbestos sampling of the material, then have it tested by a competent asbestos testing laboratory to determine the presence of asbestos fiber and the percentage of fiber contained in the material. After that, a competent plan can be developed to encapsulate or remove the material.
Asbestos is a proven hazard and should be handled very carefully.
Who should I call to help with asbestos removal, testing or sampling?
For more information about asbestos removal, sampling, and testing, please contact Criterium-Jansen Engineers at 1-888-940-0571
This webpage is intended to provide an overview. It should not be considered an official, technical document.